A4 laser labelsheets thermal scale labels priceguns and labels

PRICE GUNS & LABELS

meto monarch_paxar open_data
metovc2 m2616c1 m2616c
Actual label size
26mm x 12mm		 Actual label size
26mm x 16mm		 Actual label size
32mm x 19mm		 Actual label size
19.9 x 16.4mm		 Actual label size
19.9 x 11.2mm		 Actual label size
26mm x 12mm		 Actual label size
26mm x 16mm
Actual label size
32mm x 19mm		 Actual label size
29mm x 28mm		 Actual label size
22mm x 12mm		 Actual label size
19.9 x 11.2mm		 Actual label size
19.9 x 16.4mm		 Actual label size
26mm x 12mm		 Actual label size
26mm x 16mm
swatch
The above are a selection of the colours available, with the addition of WHITE.

The colours displayed are, however, for guidance only and do not represent the true colours of the actual label.

There are also four FLOURESCENT colours available (orange, yellow, red, and green).

The standard overprinted colours with your name are; Red, Green, Blue and Black on a white label.

Red and Black on a yellow label. Black only on all other colours.

Other combinations of background and print colour can be produced but an extra charge is incurred.
METO LABEL SIZES Monarch PAXAR LABEL SIZES OPEN DATA SIZES
22mm x 12mm 29mm x 20mm 19.9mm x 11.2mm 30mm x 19mm 26mm x 12mm 26mm x 16mm
22mm x 16mm 29mm x 28mm 19.9mm x 16.4mm 31mm x 25mm
26mm x 12mm 26mm circle 19mm x 10mm
26mm x 16mm 29mm x 28mm Octagonal 19mm x 15mm
32mm x 19mm 29mm x 28mm TV 25mm x 15mm
ADHESIVE TYPES
Removable (METO “1.1″)

A good general purpose removable, this adhesive features
moderately high initial tack yet offers clean removability from a variety of substrates. It may produce a permanent bond to certain substrates and thorough testing under end use conditions is strongly recommended. Suitable for a wide range of applications where clean removability for varying lengths of time is required.

Permanent (METO “2″)

A general purpose, permanent adhesive with high initial tack and ultimate bond strength to a variety of substrates, particularly packaging films and corrugated board, also suitable for use on glass, metal, plastic etc.

Textile (METO “3″)

A specially formulated adhesive suitable for textile environment applications. Designed to adhere to , not mark, most types of material – even after fusing.

METO “4W” Outdoor Polyester

A specially formulated adhesive suitable for outdoor and harsh environment applications. Designed for application to difficult substrates such as concrete, timber, etc. this adhesive exhibits high resistance to variations in temperature and humidity. Ideal for garden centre and horticultural applications.

 Freezer (METO “5″ Low Temperature)

An adhesive specially formulated for cold temperature applications and service without compromising general room temperature usage. Ideal for cold temperature and freezer applications in most cases this adhesive will develop a permanent bond to typical packaging films and materials.

METO “6″ Water Soluble

An adhesive specially designed for high initial tack on glass and ceramics yet can be washed off later using water without leaving a residue. Ideal for labelling gifts, china, glass and ceramics or for use in laboratories.

Monarch PAXAR KCP Waterproof

A high gloss coated paper with high tack permanent adhesive, suitable for a wide range of surfaces. Ideal for garden centre and horticultural applications.

COMING SOON

A label that SLUGS can’t eat. Sounds strange but this is a common problem in Garden Centres and Nurseries.

More information will appear here when it becomes available.